Portable Single Axle Weighbridge

Operating a Portable Single Axle Weighbridge couldn’t be easier, plug the platform into the indicator and switch the indicator on. The weighbridge is factory calibrated for maximum accuracy, so no special set up is required. Simply drive the vehicle onto the platform, and the weighbridge will then automatically weigh the vehicle.

The Portable Single Axle platform has load cells built into it which are robust and ingress protection rated IP68. The platform is designed to be regularly moved, and is particularly hard-wearing. The load cells incorporate the latest Weighbus digital technology. They are factory calibrated for maximum accuracy at all times.

Weighing vehicle’s with the Griffith Elder Portable Single Axle is a fast and easy operation. When the first set of wheels are driven onto the platform, the weight is detected and automatically captured into memory. Each set of wheels is weighed in this way, the weights are then automatically calculated and recorded.

Either a forklift or small crane can lift the platform. The Portable Single Axle Weighbridge rests easily on a trailer or flat bed truck for transport. The end ramps require no assembly before use. They are built into the platform. Additionally, the weighbridge is flexible for remote sites, operating from 12 Volts DC which run from either mains power or from leisure batteries.

A large external LED display is available for quick and easy viewing of the weights. Using the traffic light in conjunction with the large display informs the driver when to move on and off the weighbridge. Griffith Elder’s Weighbus software is compatible with the weighbridge.